Brady Corporation HX-125-150-WT-2

Brand: Brady

Part Number: HX-125-150-WT-2

Brady® PermaSleeve® Wire Marker Sleeve, 1-Sided Printable Heat Shrink, 3/4 in Width, White Marker, 20 to 16 AWG Wire, B-7642 Polyolefin, -40 to 248 deg F, For Use With: BradyPrinter™ PR Plus Label Printer

Additional Description: BRAD-HX-125-150-WT-2 (N) SLEEVE, 0.125 IN DIA X 0.75 IN W NON-CANCELABLE, NON-RETURNABLE ROLL OF 5000 EACH

Catalog Description: Heat-Shrink PermaSleeve® HX Polyolefin (B-7642) Wire Marking Sleeves are 2:1 heat shrinkable, high-temperature rated, highly flame retardant and very flexible. Supplied roll form in a flattened format on a carrier designed for use with computer driven printers. Meets SAE-AMS-DTL-23053/5 Class 1 & 3, SAE-AS-81531, MIL-STD-2002. Tested per ASTM E162 and ASTM E662. Operating temperature of -40°F to 248°F (-40°C to 120°C). This roll has i75-series smart properties on the core that when used in the Brady i7500 printer in conjunction with i75-series smart ribbons, eliminates the need to adjust heat, speed, sensor location and mode, eliminates the need to calibrate out blank wasted labels, and warns the operator if a non-approved ribbon is used with this roll. . If used in any other 3 inch core printer this roll will function as a manual roll. A ribbon is required to print this material. Use Part Number R6400.