Part Number # EDS21273
SKU # 2429767
Image Disclaimers Message
EDS21273
Crouse Hinds EDS21273 Flexstation Selector Switch Control Station
Part Number # EDS21273
SKU # 2429767
$631.92 / Each
Typical price:$834.14 / Each
Crouse Hinds EDS21273 Key Features
| Brand: | Crouse Hinds |
|---|---|
| Part Number # : | EDS21273 |
| SKU #: | 2429767 |
| Actuator: | Lever |
| Amperage Rating: | 10 A |
| Contact Configuration: | 4NO-2NC |
| Dimensions: | 5-7/8 in L x 3-1/2 in W x 3-1/16 in H |
| Finish: | Natural |
| NEMA Rating: | 3/7B/7C/7D/9E/9F/9G |
| Number of Operators: | 1 |
| Series: | EDS |
| Type: | 1-Gang Dead End Factory Sealed Heavy Duty |
| Connection type: | Screw |
| Country of origin: | MX |
| Material: | Feraloy Iron Alloy |
| Mounting type: | Surface |
| Manufacturer Name: | Eaton |
| UNSPSC: | 39122217 |
| UPC: | 00782274764689 |
Buy Now Pay Later
Get 30 days to pay with Net 30 Terms. Apply Now.
$631.92 / Each
Typical price:$834.14 / Each
Quantity:
- Crouse-Hinds FlexStation Selector Switch Control Station, 1-Gang Dead End Factory Sealed Heavy Duty, Series: EDS, 600 VAC, 10 A, 1 Operator, 4NO-2NC Contact Configuration, Maintained Contact Mode, Lever Actuator, Screw Connection, 3/7B/7C/7D/9E/9F/9G NEMA Rating, Surface Mounting, Feraloy Iron Alloy, Natural, 5-7/8 in L x 3-1/2 in W x 3-1/16 in H Dimensions
EDS21273 Application
Industrial Facilities and Factories, Facility, Power Distribution and Control, Industrial Facilities and Factories Facility, Power Distribution and Control Application ApplicationsEDS21273 Item Features
- Reduce installation problem
- Eliminate external seals
- Lower installation cost
- Improve safety
- Are used with general purpose snap and pushbutton type switches
- Standard neoprene covers for front operated pushbuttons prevents accumulation of dirt and entrance of water around operating shafts
- Mounting lugs and taper tapped hubs with integral bushing
- Large machine screws for fastening covers to bodies
- Lockout provisions on front operated pushbutton (marked "STOP" and "OFF") and selector switch covers
- Lockout hole for padlock having 1/4 in hasp is provided when used with covers for front lever and side rocker type operation
- Close tolerances in machining of wide, mating flanges and journaled shafts and bearings for front button operation, produces flame tightness of enclosure joints
- On enclosures with front lever and side rocker type operating handles, threaded type shafts and bushings are used to ensure flame tightness
- Explosionproof, dust ignitionproof, raintight
- 3/4 in hub
- Three position, two circuit
EDS21273 Standards
Class I, Division 1/2, Group B/C/D, Class II, Division 1, Group E/F/G, Class II, Division 2, Group F/G, Class III|cCSAus Certified|CE Certified|CSA C22.2|UL 1203SKU #2429767Part Number #EDS21273UNSPSC39122217UPC00782274764689