Part Number # EDSC318
SKU # 2349309
Brand: Crouse Hinds
EDSC318
Crouse Hinds EDSC318 Snap Switch Control Station
Part Number # EDSC318
SKU # 2349309
$849.23 / Each
Typical price:$1120.98 / Each
Crouse Hinds EDSC318 Key Features
| Brand: | Crouse Hinds |
|---|---|
| Part Number # : | EDSC318 |
| SKU #: | 2349309 |
| NEMA Rating: | NEMA 3/7B/7C/7D/9E/9F/9G |
| Type: | 1-Gang Factory Sealed Through-Feed |
| UNSPSC: | 39122209 |
| UPC: | 00782274765334 |
Buy Now Pay Later
Get 30 days to pay with Net 30 Terms. Apply Now.
$849.23 / Each
Typical price:$1120.98 / Each
Quantity:
- Crouse-Hinds FlexStation Snap Switch Control Station, 1-Gang Factory Sealed Through-Feed, Series: EDS, 120/277 VAC, 20 A, 2 Pole, Front Operator, Handle Actuator, Thread Connection, NEMA 3/7B/7C/7D/9E/9F/9G NEMA Rating, Surface Mounting, Feraloy Iron Alloy, Aluminum Acrylic Painted/Electro-Galvanized, 5-7/8 in L x 3-1/2 in W x 3-1/16 in H Dimensions
EDSC318 Application
Industrial Facilities and Factories, Facility, Power Distribution and Control, Industrial Facilities and Factories Facility, Power Distribution and Control Application ApplicationsEDSC318 Item Features
- Reduce installation problem
- Eliminate external seals
- Lower installation cost
- Improve safety
- Are used with general purpose snap and pushbutton type switches
- Standard neoprene covers for front operated pushbuttons prevents accumulation of dirt and entrance of water around operating shafts
- Mounting lugs and taper tapped hubs with integral bushing
- Large machine screws for fastening covers to bodies
- Lockout provisions on front operated pushbutton (marked "STOP" and "OFF") and selector switch covers
- Lockout hole for padlock having 1/4 in hasp is provided when used with covers for front lever and side rocker type operation
- Close tolerances in machining of wide, mating flanges and journaled shafts and bearings for front button operation, produces flame tightness of enclosure joints
- On enclosures with front lever and side rocker type operating handles, threaded type shafts and bushings are used to ensure flame tightness
- Dust ignitionproof, raintight
- To prevent arcing of enclosed device from causing ignition of a hazardous atmosphere external to the enclosure
- In conjunction with magnetic starters or contactors for remote control of motors
- For manual starting of small AC/DC motors
- To provide manual starting and stopping and motor running protection (with heater)
- 1 in hub
- On/off standard marking for 1-pole and 2-pole units
EDSC318 Standards
Class I, Division 1/2, Group C/D, Class II, Division 1, Group E/F/G, Class II, Division 2, Group F/G, Class III|CSA Certified|UL Listed|CSA C22.2|UL 1203SKU #2349309Part Number #EDSC318UNSPSC39122209UPC00782274765334
Image provided may only be a representation of final product and may include optional equipment