Honeywell BZ-2RW822T Basic Switch
Image Disclaimers Message
Honeywell BZ-2RW822T Basic Switch
Honeywell BZ-2RW822T Basic Switch
Part #:BZ-2RW822T
SKU #: 26776
Key Features
Part #:BZ-2RW822T
SKU #: 26776
Brand: Honeywell
Actuator: Rigid Roller Lever
Actuator Length: 26.16, 26.16 mm
Contact Configuration: SPDT
Dimensions: 2 in L x 0.7 in W x 1 in H
Electrical Ratings: 15 A at 250 VAC
- The switchs elongated mounting hole allows for easier, more accurate mounting
- Used in applications where very tight and sensitive control is required between the operate and release points
- -55 to 85 deg C operating temperature
- 2000 V between each terminal and ground dielectric strength, premium large basics SPDT
- 0.5 mm nominal break distance (minimum distance between separated mating contacts in fully open position)
- Silver contacts
- 2.39 mm over travel, 0.42 N release force
- 0.08 to 0.51 mm differential travel
- 0.33 Nm tightening torque, 25.4 mm mounting centers
- Long mechanical life up to 20,000,000 cycles at 95% survival
- Moving contact rivet construction
- Choice of actuation, termination and operating characteristics
- Accepted world-wide standard "Large Basic" switch
- Low operating force and differential travel
- Bottom facing NO 6 screws/lock washers terminal, recommended for 26.7 mm steel roller lever applications
- Plastic materia
Honeywell BZ-2RW822T Basic Switch
Honeywell MICRO SWITCH Basic Switch, Large Premium Standard, Series: BZ Series, 15 A at 250 VAC, 50/60 Hz, SPDT, 1 Pole, Rigid Roller Lever, 26.16 mm Actuator Length, 1.67 N Actuating, Screw Terminal, 20000000 Operating Cycles, Phenolic, Environmental Conditions: 1.5 mm Peak-to-Peak Amplitude, Frequency 10 to 55 Hz, 2 Continuous hr, 2 in L x 0.7 in W x 1 in H
Additional Description: HONW-BZ-2RW822T (N) LARGE BASIC SWITCH NON-CANCELABLE, NON-RETURNABLE Micro Snap Switch,250 VAC,SPDT SINGLE POLE DOUBLE THROW CIRCUITRY, 15 A AT 250 VAC, ROLLER LEVER ACTUATOR, 1,67 N [6 OZ] MAXIMUM OPERATING FORCE, SILVER CONTACTS, SCREW TERMINATION, CE, CSA, DEMKO, UL