Part Number # FXSX53
SKU # 2270875
Image Disclaimers Message
FXSX53
Hubbell FXSX53 Manual Motor Starting Switch
Part Number # FXSX53
SKU # 2270875
$1168.21 / Each
Hubbell FXSX53 Key Features
Brand: | Hubbell |
---|---|
Part Number # : | FXSX53 |
SKU #: | 2270875 |
Amperage Rating: | 20, 20 A |
Coil Voltage: | 115/200 to 230/460 to 475, 115/200 to 230/460 to 475 VAC |
Control Type: | Padlocking |
Dimensions: | 6-3/16 in H x 3-11/16 in W x 5-11/32 in D |
Enclosure Type: | NEMA 3 |
Frequency Rating: | 60, 60 Hz |
Motor Power: | 2 hp, 3 hp, 5 hp |
Number of Poles: | 3 |
Phase: | 3 |
Reset Type: | Lever |
Series: | FXSX |
Type: | 1-Gang Feed-Through Hub |
Country of origin: | US |
Material: | Aluminum |
Manufacturer Name: | Hubbell |
UNSPSC: | 39121521 |
UPC: | 00783936198101 |
Buy Now Pay Later
Get 30 days to pay with Net 30 Terms. Apply Now.
$1168.21 / Each
Quantity:
- Killark Manual Motor Starting Switch, 1-Gang Feed-Through Hub, Series: FXSX, 115/200 to 230/460 to 475 VAC, 20 A, 60 Hz, 2 hp, 3 hp, 5 hp Motor, 115/200 to 230/460 to 475 VAC Coil, 3 Poles, Lever Reset, 3 Phase, Padlocking Control, NEMA 3, Aluminum, 6-3/16 in H x 3-11/16 in W x 5-11/32 in D
FXSX53 Application
For use to provide manual starting and stopping of small AC or DC motors, motor running protection when overload heaters and across the line applications where a positive disconnect means is requiredFXSX53 Item Features
- FXSX Series (without overload protection) are ideally suited for across the line applications where a positive disconnect means is required
- Factory sealed so no external seals are required
- Enclosures are cast copper-free aluminum alloy
- Operating shaft is stainless steel
- Ground flange joint between bolted cover and box provide required flame path
- Provisions for padlocking switch in either on or off position is standard
- 2 hp at 115 VAC, 2 hp at 200 to 230 VAC, 3 hp at 460 to 575 VAC power rating
FXSX53 Standards
UL Listed|CSA Certified|FM ApprovedSKU #2270875Part Number #FXSX53UNSPSC39121521UPC00783936198101