Hubbell HBL430C9W Pin and Sleeve Connector
Image Disclaimers Message
Hubbell HBL430C9W Pin and Sleeve Connector
Hubbell HBL430C9W Pin and Sleeve Connector
Part #:HBL430C9W
SKU #: 125141
Key Features
Part #:HBL430C9W
SKU #: 125141
Brand: Hubbell
Amperage Rating: 30, 30 A
Dimensions: 4.27 in Dia x 9.05 in L
Enclosure: IP67
Horsepower: 3, 3 hp
Number of Poles: 3
- Self-closing gasketed cover
- Round portable service cords of diameters commensurate with the device rating as defined in UL standard 62, CSA C22.2 No. 49 and the harmonized European standards cord accommodation
- Terminals identified in accordance with North american and IEC conventions terminal identification, identification and ratings are a permanent part of the device housing product identification
- Watertight per IEC 60309-1 moisture resistance
- HB or better per UL 94 or CSA 22.2 No. 0.17 flammability
- Every Hubbell non-metallic pin and sleeve product is designed to meet the international standard IEC 60309-1 and IEC 60309-2, this device standard calls out singly rated, non-interchangeable configuration for every voltage and type of service device description
- High impact thermoset contact carrier and retainer
- Solid neoprene gaskets, solid neoprene grommet/glands
- Rynite SST35 cord clamps, SST35 cover arm, SST35 cover
- Super tough insulated non-metallic housing
- Stainless steel (17-1 type) arm spring, stainless steel (300 series) cord clamp screws
- Nickel plated brass clamp nut, nickel plated brass cover screw/rivet
- Polycarbonate rotating sealing disc
- Brass ground/phase sleeve, beryllium copper multi-contact insert with silver plating pin/sleeve spring
- Withstands 3000 VAC minimum dielectric voltage
- Maximum 30 deg C temperature rise at full rated current after 50 cycles of overload at 150% rated current for either AC or DC applications per UL 498 temperature rise
- 5000 connect and disconnect cycles with load for 16/20 A, 1000 cycles with load and 1000 cycles without load for 30/32/60/63 A and 250 cycles with load and 250 cycles without load for 100/125 A endurance
- Per CSA C22.2 no 182.1/UL 1682 impact resistance, per CSA C22.2 no 182.1/UL 1682 cord grip retention
- Watertight neoprene glad seal to prevent water ingress from entering at cable entrance
- Cord mounted
Hubbell HBL430C9W Pin and Sleeve Connector
Wiring Device-Kellems Pin and Sleeve Connector, Female Grounding Watertight Cord Mount, 250 VAC, 30 A, 3 hp, 3 Pole, 4 Wires, Industrial Grade, IP67 Enclosure, -40 to 75 deg C, Pressure Screw Terminal, Composite, Blue, 4.27 in Dia x 9.05 in L
Additional Description: HUBW-HBL430C9W PS,IEC,CONN,3P4W, 30/32A 200-250V,4X/69K
Catalog Description: Heavy Duty Products, IEC Pin and Sleeve Devices, Industrial Grade, Female, Connector Body, 30A 3-Phase Delta 250V AC, 3-Pole 4-Wire Grounding, Terminal Screws, Blue, Watertight