Hubbell HBL430R9W Pin and Sleeve Receptacle
Image Disclaimers Message
Hubbell HBL430R9W Pin and Sleeve Receptacle
Hubbell HBL430R9W Pin and Sleeve Receptacle
Part #:HBL430R9W
SKU #: 2144639
Key Features
Part #:HBL430R9W
SKU #: 2144639
Brand: Hubbell
Amperage Rating: 30, 30 A
Dimensions: 3-3/4 in L x 3-3/4 in W
Enclosure: IP67
Horsepower: 3 hp
Number of Poles: 3
- Rugged one piece housing, thick wall construction protects internal components, eliminates joints preventing infiltration of contaminants
- Thermoset properties provide dimensional stability for this critical assembly
- Feature patented swiveling pressure pad terminal screws and prevent damage to conductor strands
- Corrosion resistant self-closing gasketed cover
- Sequential contact engagement to prevent a momentary over voltage on components
- Super tough insulated non-metallic house for impact and chemical resistance
- Multi-contact spring provides and maintains high unit pressure on mating pins to minimize temperature rise
- Zytel 101 nylon housing, mounting flange, stainless steel (17-1 type) arm spring, Rynite SST35 cover and arm, nickel plated brass cover screw/rivet
- Stainless steel (300 series) mounting screws, terminal screws, assembly screws, pin/sleeve spring and hinge spring
- High impact thermoset contact carrier and retainer
- Polycarbonate rotating sealing disc and brass ground/phase sleeve
- Amperage/voltage rating and catalog number molded-in housing for easy identification
- Dielectric withstand voltage of 3000 VAC minimum
- 600 Vrms maximum working voltage
- Certified for current interrupting at full rated current
- Maximum 30 deg C temperature rise at full rated current after 50 cycles of overload at 150% of rated current at a power factor of 75% temperature rise
- 5000 connect and disconnect cycles with load for 16 A and 20 A, 1000 cycles with load and 1000 cycles without load for 30 A, 32 A, 60 A and 63 A and 250 cycles with load and 250 cycles without load for 100 A and 125 A endurance
- Terminals identified in accordance with North American and international conventions
- Identification and ratings are a permanent part of the device housing product identification
- Every Hubbell non-metallic pin and sleeve product is designed to meet the international standard IEC 60309-1 and IEC 60309-2
Hubbell HBL430R9W Pin and Sleeve Receptacle
Wiring Device-Kellems HBL Pin and Sleeve Receptacle, 3-Phase Flanged Grounding Non-NEMA Single Standard Watertight Screw Mount, 250 VAC, 30 A, 3 Pole, 4 Wires, Industrial Grade, IP67 Enclosure, -40 to 75 deg C, Pressure Screw Terminal, Thermoplastic, Blue, 3-3/4 in L x 3-3/4 in W
Additional Description: HUBW-HBL430R9W PS, RCPT, 3P4W, 30/32A 200-250V,4X/69K W/T
Catalog Description: Heavy Duty Products, IEC Pin and Sleeve Devices, Industrial Grade, Female, Receptacle, 30A 3-Phase Delta 250V AC, 3-Pole 4-Wire Grounding, Terminal Screws, Blue, Watertight