Part Number # ODS10-IDG
SKU # 175307
ODS10-IDG
LEVITON ODS10-IDG Decora Occupancy Sensor
Part Number # ODS10-IDG
SKU # 175307
LEVITON ODS10-IDG Key Features
| Brand: | LEVITON |
|---|---|
| Part Number # : | ODS10-IDG |
| SKU #: | 175307 |
| Control Output: | Manual On/Automatic Off |
| Dimensions: | 1.75 in W x 1.85 in D x 46 in H, 46 in H x 1.75 in W x 1.85 in D |
| Sensor Type: | PIR |
| Temperature Rating (Degrees F): | 0 to 50, 0 to 50 deg C |
| Time Delay: | 30 s to 30 min |
| UNSPSC: | 45111808 |
| UPC: | 00078477010204 |
Buy Now Pay Later
Get 30 days to pay with Net 30 Terms. Apply Now.
LEVITON ODS10-IDG Decora Occupancy Sensor
Brand: LEVITON
Part Number: ODS10-IDG
Leviton Decora Occupancy Sensor, 1-Pole, 120/230/277 VAC, 100/250 mW Power, Passive Infrared Sensor, 2100 sq-ft Coverage, 180 deg Viewing, 30 s to 30 min Time Delay, Fluorescent/Incandescent Lamp, 50/60 Hz Response, Manual On/Automatic Off Control Output, Wall Mounting, 0 to 50 deg C, Gray, 1.75 in W x 1.85 in D x 46 in H Dimensions
Additional Description: LVTN-ODS10-IDG GY PIR OCC SENS WALL SW 180D 120/277VAC
Catalog Description: Decora Passive Infrared Wall Switch Occupancy Sensor, 180 Degree, 2100 sq. ft. Coverage, Gray
ODS10-IDG Application
Small Offices, Conference Rooms, Classrooms, Lounges and Commercial ApplicationsODS10-IDG Item Features
- Fits in standard wallbox and replaces 1-pole wall switch, gangable with other units
- Low profile design eliminates obtrusive scanning-device look
- Convenient pushbutton provides manual ON/Off light switching at any time
- Two dual element PIR sensors used to widen detection range
- Segmented fresnel lens provides optimum sensitivity and performance designed with an extensive minor motion area where even slight body movements will be detected
- Vandal-resistant PIR lens
- Horizontal field-of-view may be adjusted between 180 and 60 deg of arc by using integral blinders located on either side of the lens, no masking tape required
- Manual On/auto Off mode for installations where manual On switching is required but auto Off switching is still desired for CEC title T24 energy savings
- To comply with T24, red LED indicator light flashes when sensor detects motion to verify detection is active
- Time delay adjustment for delayed Off time settings of 30 sec (for walking test), 10, 20 and 30 min, allows customized adjustments to maximum energy savings
- Light sensor adjustable ambient light override ranges from approximately 20 to 5000+ LUX to prevent lights from turning On automatically during periods of ample natural light, increasing energy savings
- Light sensor enables the load hold Off feature once level has been set
- Vacancy confirmation when the time out expires and the lights turns Off, a 30 sec vacancy confirmation exists to turn the lights back ON
- False detection circuitry
- Presentation mode feature for slide or film presentations allows pushbuttons to turn lights Off and keep them Off while the room is occupied
- 1-unit can be used for 120 to 277 VAC lighting
- Compatible with both electronic and magnetic ballasts
- Relay switches at the zero crossing point of the AC power curve to ensure maximum contact life and compatibility with electronic ballasts
- Exclusive Leviton high inrush stability (HIS) circuitry, specifically designed to handle todays high inrush electronic ballast loads and offer unmatched durability and service
- No neutral design is optional for retrofit applications
- https://www.youtube.com/embed/vekEu7H-Tmo
ODS10-IDG Standards
CSA Certified|CEC Title 20/24 Compliant|NOM Compliant|FCC Certified|UL ListedSKU #175307Part Number #ODS10-IDGUNSPSC45111808UPC00078477010204
Image provided may only be a representation of final product and may include optional equipment