SSAC-SYMCOM ARP41S Alternating Relay

Littelfuse SSAC Alternating Relay, Series: ARP, 50/60 Hz Frequency, 120 VAC Coil, SPDT Contact Form, 10 A at 120/240 VAC, 28 VDC Contact, 8 Pins, Plug-In/Socket Mounting, -20 to 60 deg C, 1.78 in W x 3.2 in D x 2.39 in H Dimensions

Additional Description: LTFS-ARP41S ALTERNATING RELAY,120V,S

Catalog Description: The ARP Series is used in systems where equal run time for two motors is desirable. The selector switch allows selection of alternation of either load for continuous operation. LED’s indicate the status of the output relay. This versatile series may be front panel mounted (BZ1 accessory required) or 35 mm DIN rail mounted with an accessory socket. Operation: Alternating: When the rotary switch is in the “alternate” position, alternating operation of Load A and Load B occurs upon the opening of the control switch S1. To terminate alternating operation and cause only the selected load to operate, rotate the switch to position “A” to lock Load A or position “B” to lock Load B. The LEDs indicate the status of the internal relay and which load is selected to operate. Note: Input voltage must be applied at all times for proper alternation. The use of a solid-state control switch for S1 may not initiate alternation correctly. S1 voltage must be from the same supply as the unit’s input voltag