SSAC-SYMCOM KSDB2115S Time Delay Relay
Image Disclaimers Message
SSAC-SYMCOM KSDB2115S Time Delay Relay
SSAC-SYMCOM KSDB2115S Time Delay Relay
Part #:KSDB2115S
SKU #: 2133278
Key Features
Part #:KSDB2115S
SKU #: 2133278
Brand: Littelfuse
Contact Form: SPDT/NO-NC (1 Form C)
Dimensions: 2 in H x 2 in W x 1.21 in D
Electrical Connections: Male Quick Connect Terminal, Male Quick-Connect Terminal
Operation Mode: Delay On Break
Series: KSDB
- Microcontroller based repeat accuracy +/-0.5%, factory calibration +/-5%
- 1 A steady, 10 A inrush solid state output provide 100 million operations in typical conditions
- Totally solid state and encapsulated no moving parts to arc and wear out over time and encapsulated to protect against shock, vibration and humidity
- Compact, low cost design allows flexibility for OEM applications
SSAC-SYMCOM KSDB2115S Time Delay Relay
Littelfuse SSAC Time Delay Relay, Fixed, Series: KSDB, Operation Mode: Delay On Break, 24 VAC, SPDT/NO-NC (1 Form C) Contact Form, 15 s Time Setting, Male Quick-Connect Terminal Electrical Connections, -40 to 60 deg F, Surface Mounting, 2 in H x 2 in W x 1.21 in D
Additional Description: LTFS-KSDB2115S SSAC SOLID STATE TIMER
Catalog Description: The KSDB is designed for general purpose commercial and industrial applications where a small, cost effective, reliable solid-state timer is required. The factory calibration for fixed time delays is within 5% of the target time delay. The repeat accuracy, under stable conditions, is 0.5% of the selected time delay. This series is designed for popular AC and DC voltages. Time delays of 0.1 seconds to 1000 minutes are available in 6 ranges. The output is rated 1A steady and 10A inrush. The modules are totally solid state and encapsulated to protect the electronic circuitry. Operation (Delay-on-Break): Input voltage must be applied before and during timing. Upon closure of the initiate switch, the output energizes. The time delay begins when the initiate switch is opened. The output remains energized during timing. At the end of the time delay, the output de-energizes. The output energizes if the initiate switch is closed when input voltage is applied. Reset: Reclosing the initiate swit