SSAC-SYMCOM TDU3000A Timing Relay
SSAC-SYMCOM TDU3000A Timing Relay
Part #:TDU3000A
SKU #: 2208368
Key Features
Part #:TDU3000A
SKU #: 2208368
Brand: Littelfuse
Amperage Rating: 1, 1 A
Coil Voltage: 120, 120 VAC
Contact Form: SPST
Dimensions: 2 in H x 2 in W x 1.21 in D
Number of Pins: 8
- +/-20% input tolerance
- 50/60 Hz input AC line frequency
- Solid-state output
- NO open during timing output form
- 1 A steady state 10 A inrush at 60 deg C output load rating
- 2.5 VAC at 1 A output voltage drop
- 40 mA minimum output holding current
- +/-10% time delay tolerance
- 150 ms recycle time
- +/-0.5% or 20 ms whichever is greater repeat accuracy
- +/-5% set point vs ambient temperature and operating voltage
- 100 MOhm insulation resistance
- 2000 Vrms terminals to mounting surface
- Encapsulated circuitry
- 1/4 in male quick connect terminals
- Surface mount with one #10 (M5 x 0.8) screw
- -40 to 185 deg F storage temperature
- 95% relative non-condensing humidity
SSAC-SYMCOM TDU3000A Timing Relay
Littelfuse Timing Relay, Digital Integrated Circuitry, Series: TDU, Operation Mode: Delay On Make, 24 to 120 VAC/VDC, 1 A, 8 Pins, SPST, 1 to 1023 s, 120 VAC Coil, -40 to 140 deg F, Surface Mount, 2 in H x 2 in W x 1.21 in D
Additional Description: LTFS-TDU3000A SOLID STATE TIMER
Catalog Description: The TDU Series are encapsulated solid-state, delay-on-make timers that combine digital timing circuitry with universal voltage operation. The TDU offers DIP switch adjustment allowing accurate selection of the time delay over the full time delay range. This series is an excellent choice for process control systems and OEM equipment. Operation (Delay-on-Make): Upon application of input voltage, the time delay begins. The output is de-energized before and during the time delay. At the end of the time delay, the output energizes and remains energized until input voltage is removed. Reset: Removing input voltage resets the time delay and output.