SSAC-SYMCOM TDUS3000A Solid State Relay Timer
SSAC-SYMCOM TDUS3000A Solid State Relay Timer
Part #:TDUS3000A
SKU #: 2155427
Key Features
Part #:TDUS3000A
SKU #: 2155427
Brand: Littelfuse
Coil Voltage: 24 to 120, 24 to 120 VAC
Contact Form: SPST/NO (1 Form A)
Dimensions: 2 in H x 2 in W x 1.21 in D
Electrical Connections: Male Quick Connect Terminal, Male Quick-Connect Terminal
Operation Mode: Single Shot
- Microcontroller based repeat accuracy +/-0.1%
- Compact design allows flexibility for OEM applications
- 1 A steady, 10 A inrush solid state output provide 100 million operations in typical conditions
- Totally solid state and encapsulated no moving parts to arc and wear out over time and encapsulated to protect against shock, vibration and humidity
SSAC-SYMCOM TDUS3000A Solid State Relay Timer
Littelfuse SSAC Solid State Relay Timer, Digital Timing Circuitry, Series: TDUS, Operation Mode: Single Shot, SPST/NO (1 Form A) Contact Form, 1 to 1023 s Time Setting, 24 to 120 VAC Coil, Male Quick-Connect Terminal Electrical Connections, -20 to 65 deg F, Plug-In/Socket Mounting, 2 in H x 2 in W x 1.21 in D
Additional Description: LTFS-TDUS3000A DIGI-SET TIMER-SINGLE
Catalog Description: The TDUS Series combines digital timing circuitry with universal voltage operation. Voltages of 24 to 240VAC and 12 to 24VDC are available in three ranges. The TDUS Series offers DIP switch selectable time delays ranging from 0.1 seconds to 102.3 minutes in three ranges. Its 1A rated output, ability to operate on multiple voltages, and wide range of switch selectable time delays make the TDUS Series an excellent choice for process control systems and OEM equipment. Operation (Single Shot): Input voltage must be applied before and during timing. Upon momentary or maintained closure of the initiate switch (leading edge triggered), the output energizes for a measured interval of time. At the end of the delay, the output de-energizes. Opening or reclosing the initiate switch during timing has no affect on the time delay. The output will energize if the initiate switch is closed when input voltage is applied. Reset: Reset occurs when the time delay is complete and the initiate switch is op