Schneider Electric LC1D09JL Tesys D Iec Contactor
Image Disclaimers Message
Schneider Electric LC1D09JL Tesys D Iec Contactor
Schneider Electric LC1D09JL Tesys D Iec Contactor
Part #:LC1D09JL
SKU #: 2288782
Key Features
Part #:LC1D09JL
SKU #: 2288782
Brand: Schneider Electric
Coil Power Rating: 7-1/2 hp
Coil Voltage: 12 VDC
Contact Configuration: 3NO
Contact Rating: 9 A at 440 VAC
Dimensions: 1.77 in W x 3.39 in D x 3.03 in H
- 6 kV conforming to IEC 60947 rated impulse withstand voltage
- III overvoltage category
- 25 A at 140 deg F power circuit, 10 A at 140 deg F signaling circuit conventional free air thermal current
- 250 A at 440 V power circuit conforming to IEC 60947/140 A AC signaling circuit conforming to IEC 60947-5 1/250 A DC signaling circuit conforming to IEC 60947-5 1 IRMS rated making capacity
- 250 A at 440 V power circuit conforming to IEC 60947 rated breaking capacity
- 20 A gG at 690 V coordination type 2 power circuit/25 A gG at 690 V coordination type 1 power circuit/10 A gG signaling circuit conforming to IEC 60947-5 1 associated fuse rating
- 2.5 MOhm at 50 Hz, Ith 25 A power circuit average impedance
- 65.45 to 88.55 ms closing and 20 to 30 ms opening operating time
- 3600 cycles/hr at 140 deg F operating rate
- Built-in bi-directional peak limiting diode suppressor coil technology
- 40 ms time constant
- 2.4 W at 68 deg F inrush power
- 2.4 W at 68 deg F hold-in power consumption
- 25 to 400 Hz signaling circuit frequency
- 5 mA minimum switching current
- 17 VAC signaling circuit minimum switching voltage
- 1.5 ms on energization between NC and NO contacts/1.5 ms on de-energization between NC and NO contacts non-overlap time
- >10 MOhm signaling circuit insulation resistance
- TH protective treatment
- 3 deg of pollution
Schneider Electric LC1D09JL Tesys D Iec Contactor
Schneider Electric TeSys D IEC Contactor, LC1D, 12 VDC Coil, 25 A Maximum Load Current, 7-1/2 hp Coil, 3 Pole, 50/60 Hz Frequency, 1.56/0.2 W Wattage, 3NO Contact Configuration, 1NO-1NC Auxiliary Contacts, 9 A at 440 VAC Contact, Screw Clamp Connection, Screw Clamp Terminal, Open Enclosure, 30000000 Cycles Operating Cycles, -4 to 140 deg F Operating, DIN Rail/Plate Mounting, 1.77 in W x 3.39 in D x 3.03 in H Dimensions
Additional Description: SQD -LC1D09JL TeSys CONTACTOR
Catalog Description: IEC contactor, TeSys Deca, nonreversing, 9A, 5HP at 480VAC, up to 100kA SCCR, 3 phase, 3 NO, low consumption 12VDC coil