Schneider Electric LC1D258M7 Tesys D Iec Contactor
Image Disclaimers Message
Schneider Electric LC1D258M7 Tesys D Iec Contactor
Schneider Electric LC1D258M7 Tesys D Iec Contactor
Part #:LC1D258M7
SKU #: 2167849
Key Features
Part #:LC1D258M7
SKU #: 2167849
Brand: Schneider Electric
Coil Power Rating: 70 VA Inrush, 7 VA Hold-In
Coil Voltage: 220/690 VAC, 300 VDC
Contact Configuration: 2NO-2NC
Contact Rating: 40 A at 600 VAC
Dimensions: 4.13 in H x 1.77 in W x 3.9 in D
- 6 kV conforming to IEC 60947 rated impulse withstand voltage
- III overvoltage category
- 40 A at 140 deg F power circuit, 10 A at 140 deg F signaling circuit conventional-free air thermal current
- 450 A at 440 V power circuit conforming to IEC 60947/140 A AC signaling circuit conforming to IEC 60947-5-1/250 A DC signaling circuit conforming to IEC 60947-5-1 IRMs rated making capacity
- 450 A at 440 V power circuit conforming to IEC 60947 rated breaking capacity
- 40 A gG at 690 V coordination type 2-power circuit/63 A gG at 690 V coordination type 1 power circuit/10 A gG signaling circuit conforming to IEC 60947-5-1 associated fuse rating
- 2 MOhm at 50 Hz, Ith 25 A power circuit average impedance
- 12 to 22 ms closing/4 to 19 ms opening operating time
- 3600 cycles/hr at 140 deg F operating rate
- Without built-in suppressor module coil technology
- 2 to 3 W at 60 Hz heat dissipation
- 70 VA at 68 deg F 50/60 Hz inrush power
- 7.5 VA at 68 deg F 60 Hz/7 VA at 68 deg F 50 Hz hold-in power consumption
- 25 to 400 Hz signaling circuit frequency
- 5 mA minimum switching current
- 17 VAC signaling circuit minimum switching voltage
- 1.5 ms on energization between NC and NO contacts/1.5 ms on de-energization between NC and NO contacts non-overlap time
- >10 MOhm signaling circuit insulation resistance
- TH protective treatment
- Without built-in suppressor module
- https://www.youtube.com/embed/ZspiS_-OK5U
Schneider Electric LC1D258M7 Tesys D Iec Contactor
Schneider Electric TeSys D IEC Contactor, Series: D-Line LC1D, 220/690 VAC, 300 VDC Coil, 40 A Maximum Load Current, 70 VA Inrush, 7 VA Hold-In Coil, 4 Pole, 50/60 Hz, 25 to 400 Hz Frequency, 3.2 W Wattage, 2NO-2NC Contact Configuration, 2 Auxiliary Contacts, 40 A at 600 VAC Contact, Screw Clamp Terminal, Open Enclosure, 15000000 Cycles Operating Cycles, -5 to 60 deg C Operating, Rail/Surface Mounting, 4.13 in H x 1.77 in W x 3.9 in D Dimensions
Additional Description: SQD -LC1D258M7 TeSys 4P CTR 40A AC1 2NO 2NC 220VAC COIL
Catalog Description: IEC contactor, TeSys Deca, nonreversing, 40A resistive, 4 pole, 2 NO and 2 NC, 220VAC 50/60Hz coil, open style