Schneider Electric LC1D40M7 Iec Contactor
Image Disclaimers Message
Schneider Electric LC1D40M7 Iec Contactor
Schneider Electric LC1D40M7 Iec Contactor
Part #:LC1D40M7
SKU #: 973364
Key Features
Part #:LC1D40M7
SKU #: 973364
Brand: Schneider Electric
Coil Power Rating: 13/15, 13/15 VA
Coil Voltage: 220, 220 VAC
Contact Configuration: 3NO
Dimensions: 127 mm H x 75 mm W x 119 mm D
Enclosure Type: Open
- Designed to control and provide overload protection to motors rated upto 100 hp at 480 VAC or 125 hp at 600 VAC, TeSys D meets your needs for a majority of motor starter applications
- New TeSys D green increase TeSys D range with a new electronic coil with upto 80% less consumption than TeSys D standard AC or DC coil
- TeSys D green contactor associated with TeSys LR9D electronic overload relay reduces heat generation and energy consumption upto 50%
- High fault short circuit current ratings provide the flexibility to select any component, as long as it meets or exceeds the desired SCCR
- All contactors include built-in auxiliary contacts
- All screw connections have IP20 finger safe terminals with both north American and international terminal markings
- Designed for perfect integration in control systems
- Can be used to create motor starters for any type of application
- 3 hp 115 VAC 60 Hz 1 ph, 5 hp 230/240 VAC 60 Hz 1 ph, 10 hp 200/208 VAC 60 Hz 3 ph, 10 hp 230/240 VAC 60 Hz 3 ph, 30 hp 460/480 VAC 60 Hz 3 ph, 30 hp 575/600 VAC 60 Hz 3 ph, without built-in bi-directional peak limiting diode suppressor
- TeSys D contactors are available in 11 contactor ratings for the USA market for inductive motor applications from 9 up to 150 full-load amps and resistive loads up to 200 amps
- Eliminates the time-consuming process of selecting tested combinations through web sites and spreadsheets
- Simple to select the right product
- 3-pole and 4-pole contactor versions available
- Easily installed accessories
Schneider Electric LC1D40M7 Iec Contactor
Schneider Electric Square D IEC Contactor, Series: TeSys D LC1D, 220 VAC Coil, 40/60 A Maximum Load Current, 13/15 VA Coil, 3 Pole, 50/60 Hz Frequency, 1 to 2.4/5.4 W Wattage, Non-Reversing Contact, 3NO Contact Configuration, 2 Auxiliary Contacts, Screw Clamp Terminal, Open Enclosure, 3600 Cycles/hr Operating Cycles, -5 to 60 deg C Operating, Plate/Rail Mounting, 127 mm H x 75 mm W x 119 mm D Dimensions
Additional Description: SQD -LC1D40M7 3P OLD CONT 22KW 1NO 1NC 220VAC COIL +OPTIONS OPTIONS
Catalog Description: IEC contactor, TeSys D, nonreversing, 40A, 30HP at 480VAC, up to 100kA SCCR, 3 phase, 3 NO, 220VAC 50/60Hz coil, open