Schneider Electric LC1D40U7 Tesys D Iec Contactor
Schneider Electric LC1D40U7 Tesys D Iec Contactor
Part #:LC1D40U7
SKU #: 934538
Key Features
Part #:LC1D40U7
SKU #: 934538
Brand: Schneider Electric
Coil Power Rating: 220 VA Inrush, 22 VA Hold-In
Coil Voltage: 240, 240 VAC
Contact Configuration: 3NO
Contact Rating: 40 A at 600 VAC
Dimensions: 127 mm H x 75 mm W x 119 mm D
- 3 hp at 115 VAC, 5 hp at 230 VAC 1 ph, 10 hp at 200/230 VAC, 30 hp at 460 VAC, 30 hp at 575 VAC polyphase
- 10 A at 140 deg F control circuit conventional free air thermal current
- TeSys D contactors are available in 11 contactor ratings for the USA market for inductive motor applications from 9 up to 150 full-load amps and resistive loads up to 200 amps
- Designed to control and provide overload protection to motors rated up to 100 HP at 480 VAC or 125 HP at 600 VAC, TeSys D meets your needs for a majority of motor starter applications
- New TeSys D Green increase TeSys D range with a new electronic coil with up to 80% less consumption than TeSys D standard AC or DC coil
- TeSys D Green contactor associated with TeSys LR9D electronic overload relay reduces heat generation and energy consumption up to 50
- High-fault short circuit current ratings provide the flexibility to select any component, as long as it meets or exceeds the desired SCCR
- Eliminates the time-consuming process of selecting tested combinations through web sites and spreadsheets
- Simple to select the right product
- 3-pole and 4-pole contactor versions available
- All contactors include built-in auxiliary contacts
- All screw connections have IP20 finger-safe terminals with both North American and International terminal markings
- Easily installed accessories
Schneider Electric LC1D40U7 Tesys D Iec Contactor
Schneider Electric TeSys D IEC Contactor, Series: D-Line LC1D, 240 VAC Coil, 10 A Maximum Load Current, 220 VA Inrush, 22 VA Hold-In Coil, 3 Pole, 50/60 Hz Frequency, 22 kW Wattage, Non-Reversing Contact, 3NO Contact Configuration, 1NO-1NC Auxiliary Contacts, 40 A at 600 VAC Contact, Power Factor: 0.75 Inrush, 0.3 Hold-In, Screw Clamp Connection, Screw Clamp Terminal, IP2X Enclosure, 6000000 Cycles Operating Cycles, -5 to 60 deg C Operating, Surface Mounting, 127 mm H x 75 mm W x 119 mm D Dimens
Additional Description: SQD -LC1D40U7 3P OLD CONT 22KW 1NO 1NC 240VAC COIL
Catalog Description: IEC contactor, TeSys D, nonreversing, 40A, 30HP at 480VAC, up to 100kA SCCR, 3 phase, 3 NO, 240VAC 50/60Hz coil, open