Schneider Electric LC1D50BD Tesys D Iec Contactor
Image Disclaimers Message
Schneider Electric LC1D50BD Tesys D Iec Contactor
Schneider Electric LC1D50BD Tesys D Iec Contactor
Part #:LC1D50BD
SKU #: 357009
Key Features
Part #:LC1D50BD
SKU #: 357009
Brand: Schneider Electric
Coil Power Rating: 7.4, 7.4 W
Coil Voltage: 24, 24 VDC
Contact Configuration: 3NO
Contact Rating: 50 A at 600 VAC
Dimensions: 127 mm H x 85 mm W x 176 mm D
- 8 kV conforming to IEC 60947 rated impulse withstand voltage
- III overvoltage category
- 80 A at 140 deg F power circuit, 10 A at 140 deg F signaling circuit conventional free air thermal current
- 250 a DC control circuit conforming to IEC 60947-5 1, 900 A at 440 V power circuit conforming to IEC 60947 irms rated making capacity
- 10 A gG control circuit conforming to IEC 60947-5-1/100 A gG at 690 V coordination type 1 power circuit/100 A gG at 690 V coordination type 2-power circuit associated fuse rating
- 20 ms opening/50 ms closing operating time
- 3600 cycles/hr at 140 deg F operating rate
- Built-in bi-directional peak limiting diode suppressor coil technology
- 3 hp 115 VAC 60 Hz 1 ph, 7.5 hp 230/240 VAC 60 Hz 1 ph, 15 hp 200/208 VAC 60 Hz 3 ph, 15 hp 230/240 VAC 60 Hz 3 ph, 40 hp 460/480 VAC 60 Hz 3 ph, 40 hp 575/600 VAC 60 Hz 3 ph
- 19 W at 68 deg F inrush power, 7.4 W at 68 deg F hold-in power consumption
- 34 ms time constant
- 25 to 400 Hz signaling circuit frequency
- 5 mA minimum switching current
- 17 VAC signaling circuit minimum switching voltage
- 1.5 ms on energization between NC and NO contacts/1.5 ms on de-energization between NC and NO contacts non-overlap time
- >10 MOhm signaling circuit insulation resistance
- TH protective treatment
- 3 deg of pollution
- -40 to 158 deg F permissible ambient air temperature around the device, -76 to 176 deg F storage temperature
Schneider Electric LC1D50BD Tesys D Iec Contactor
Schneider Electric TeSys D IEC Contactor, Series: TeSys D LC1D, 24 VDC Coil, 50/80 A Maximum Load Current, 7.4 W Coil, 3 Pole, 50/60 Hz Frequency, 14 W Wattage, 3NO Contact Configuration, 2 Auxiliary Contacts, 50 A at 600 VAC Contact, Screw Clamp Terminal, Open Enclosure, 3600 Cycles/hr Operating Cycles, -5 to 60 deg C Operating, Plate/Rail/Surface Mounting, 127 mm H x 85 mm W x 176 mm D Dimensions
Additional Description: SQD -LC1D50BD CONTACTOR
Catalog Description: IEC contactor, TeSys D, nonreversing, 50A, 40HP at 480VAC, up to 100kA SCCR, 3 phase, 3 NO, 24VDC coil, open