Schneider Electric LC1D50T6 LC1D Contactor
Image Disclaimers Message
Schneider Electric LC1D50T6 LC1D Contactor
Schneider Electric LC1D50T6 LC1D Contactor
Part #:LC1D50T6
SKU #: 357006
Key Features
Part #:LC1D50T6
SKU #: 357006
Brand: Schneider Electric
Coil Power Rating: 13, 15, 15 VA
Coil Voltage: 480 VAC
Contact Configuration: 3NO
Contact Rating: 10/80 A
Dimensions: 122 mm H x 55 mm W x 119 mm D, 55 mm W x 119 mm D x 122 mm H
- Designed to control and provide overload protection to motors rated up to 100 hp at 480 VAC or 125 hp at 600 VAC, TeSys D meets your needs for a majority of motor starter applications
- New TeSys D green increase TeSys D range with a new electronic coil with up to 80% less consumption than TeSys D standard AC or DC coil
- TeSys D green contactor associated with TeSys LR9D electronic overload relay reduces heat generation and energy consumption up to 50%
- TeSys D contactors can be panel mounted with screws or DIN rail mounted
- Without built-in bidirectional peak limiting diode suppressor
- TeSys D contactors are available in 11 contactor ratings for the USA market for inductive motor applications from 9 up to 150 full-load amps and resistive loads up to 200 amps
- TeSys D Green contactor simplify your maintenance services with 90% less references needed
- High-fault short circuit current ratings provide the flexibility to select any component, as long as it meets or exceeds the desired SCCR
- Eliminates the time-consuming process of selecting tested combinations through web sites and spreadsheets
- Simple to select the right product
- 3-pole and 4-pole contactor versions available
- All contactors include built-in auxiliary contacts
- All screw connections have IP20 finger-safe terminals with both North American and International terminal markings
- Easily installed accessories
Schneider Electric LC1D50T6 LC1D Contactor
Schneider Electric Square D™ TeSys™ D Contactor, Series: LC1D, 480 VAC Coil, 80 A at 1 ph/50 A at 3 ph Maximum Load Current, 15 VA Coil, 3 Pole, 25 to 400 Hz Frequency, 9.6 W at 1 ph/3.7 W at 3 ph Wattage, 3NO Contact Configuration, 1NO-1NC Auxiliary Contacts, 10/80 A Contact, Screw Connection, Screw Clamp Terminal, IP2X Enclosure, 3600 Cycles Operating Cycles, -5 to 60 deg C Operating, Surface Mounting, 55 mm W x 119 mm D x 122 mm H Dimensions
Additional Description: SQD -LC1D50T6 CONTACTOR
Catalog Description: IEC contactor, TeSys D, nonreversing, 50A, 40HP at 480VAC, up to 100kA SCCR, 3 phase, 3 NO, 480VAC 60Hz coil, open