Part Number # LU2B12BL
SKU # 973010
Image Disclaimers Message
LU2B12BL
Schneider Electric LU2B12BL Power Base
Part Number # LU2B12BL
SKU # 973010
$497.71 / Each
Typical price:$574.91 / Each
Schneider Electric LU2B12BL Key Features
| Brand: | Schneider Electric |
|---|---|
| Part Number # : | LU2B12BL |
| SKU #: | 973010 |
| Dimensions: | 8.82 in H x 1.77 in W x 4.96 in D |
| Number of Poles: | 3 |
| Series: | LU2B, TeSys LU2B, TeSys™ LU2B |
| Specifications: | Screw Clamp Terminal, 12 A, 24 V DC, 1NO-1NC, 230/440/500/690 V AC, 40 to 60 Hz, Screw Clamp Terminal, 12 A, 24 VDC, 1NO-1NC, 230/440/500/690 VAC, 40 to 60 Hz |
| Suitable For Use With: | TeSys Isolated Motor, TeSys™ Isolated Motor |
| Type: | Reversing, Self-Protected |
| Country of origin: | FR |
| Manufacturer Name: | Schneider Electric |
| UNSPSC: | 39121521 |
| UPC: | 00785901519881 |
Buy Now Pay Later
Get 30 days to pay with Net 30 Terms. Apply Now.
$497.71 / Each
Typical price:$574.91 / Each
Quantity:
- Schneider Electric Square D Power Base, Reversing, Series: TeSys LU2B, 3 Pole, For Use With: TeSys Isolated Motor, Specifications: Screw Clamp Terminal, 12 A, 24 V DC, 1NO-1NC, 230/440/500/690 V AC, 40 to 60 Hz, 8.82 in H x 1.77 in W x 4.96 in D Dimensions
LU2B12BL Specifications
- Suitability for isolation
- 0 kV 24 VDC, 1 kV serial mode conforming to IEC 60947-6-2, 2 kV common mode conforming to IEC 60947-6-2 non-dissipating shock wave, 10 V conforming to IEC 61000-4-6 immunity to radio electric fields
- 1/2 hp at 1 phase 120 VAC, 2 hp at 1 phase 240 VAC, 10 hp at 3 phase 575 VAC, 3 hp at 3 phase 208 VAC, 3 hp at 3 phase 220/240 VAC, 7.5 hp at 3 phase 460 VAC power rating
- -13 to 140 deg F with LUCM/-13 to 158 deg F with LUCA, LUCB, LUCC, LUCD
- 10 kA 500 V, 4 kA 690 V, 50 kA 230 V, 50 kA 440 V rated service breaking capacity
- 120 mA at 24 VDC I maximum while closing, 120 mA at 24 VDC Irms sealed typical current consumption
- 150 ms with change of direction power circuit, 35 ms opening with LUCA, LUCB, LUCC, LUCD, LUCM control circuit, 70 ms closing with LUCA, LUCB, LUCC, LUCD control circuit, 75 ms closing with LUCM control circuit, 75 ms without change of direction power circuit operating time, 15 ms DC network duration of inrush phase
- 15000000 cycles mechanical durability, 60 cycles/min operating rate, 6 kV conforming to IEC 60947-6-2 rated impulse withstand voltage, 600 V conforming to CSA C22.2 No 14, 600 V conforming to UL 508, 690 V conforming to IEC 60947-1 3 rated insulation voltage
- Control circuit: 7.08-10.62 lbf.in- with screwdriver 0.2 in flat, control circuit: 7.08-10.62 lbf.in - with screwdriver 0.2 in Philips no 1, power circuit: 16.81-22.12 lbf.in- with screwdriver 0.24 in flat, power circuit: 16.81-22.12 lbf.in - with screwdriver 0.24 in Philips no 2 tightening torque
- 2 W for control circuit with LUCA, LUCB, LUCC, LUCD, 1.7 W for control circuit with LUCM heat dissipation
- IP20 front panel and wired terminals conforming to IEC 60947-1, IP20 other faces conforming to IEC 60947-1, IP40 front panel outside connection zone conforming to IEC 60947-1 IP degree of protection
- TH conforming to IEC 60068 protective treatment
LU2B12BL Standards
RoHS Compliant|ABS Certified|ASEFA Certified|ATEX Compliant|BV Certified|CCC Certified|CSA C22.2 No. 14 Type E|DNV Certified|GL Certified|GoST-R Certified|Lloyds Register Certified|EN 60947-6-2|IEC 60947-6-2|UL 508 Type E|ECCN: EAR99|PROP65: This product can expose you to chemicals including: Antimony oxide & Antimony trioxide, which is known to the State of California to cause cancer. For more information go to www.p65warnings.ca.govSKU #973010Part Number #LU2B12BLUNSPSC39121521UPC00785901519881