Schneider Electric ZENL1111 Contact Block
Schneider Electric ZENL1111 Contact Block
Part #:ZENL1111
SKU #: 338302
$13.14/EA
Key Features
Part #:ZENL1111
SKU #: 338302
Brand: Schneider Electric
Contact Configuration: 1NO
Contact Rating: 10, 10 A, 10 A at 600 VAC, 10:00 AM
Enclosure: IP20
Mounting: Rear
Number of Poles: 1
$13.14/EA
38 In Stock
Ships in 1 Business Day
- Single contact block type
- Slow-break contacts operation
- 2.6 mm (NO changing electrical state), 4.3 mm (total travel) operating travel
- 2.3 N (NO changing electrical state) operating force
- 0.05 N.m (NO changing electrical state) operating torque
- <= 2 x 1.5 mm2 with cable end conforming to EN 60947-1 screw clamp terminals, >= 1 x 0.22 mm2 without cable end conforming to EN 60947-1 screw clamp terminals connections terminals
- <= 25 M ohm resistance across terminals
- 0.8 to 1.2 N.m tightening torque conforming to EN 60947-1
- 600 V conforming to IEC 60947-1 rated insulation voltage
- 6 kV conforming to IEC 60947-1 rated impulse withstand voltage
- 3 A at 240 V, AC-15, A600 conforming to EN/IEC 60947-5-1, 6 A at 120 V, AC-15, A600 conforming to EN/IEC 60947-5-1, 0.1 A at 600 V, DC-13, Q600 conforming to EN/IEC 60947-5-1, 0.27 A at 250 V, DC-13, Q600 conforming to EN/IEC 60947-5-1, 0.55 A at 125 V, DC-13, Q600 conforming to EN/IEC 60947-5-1, 1.2 A at 600 V, AC-15, A600 conforming to EN/IEC 60947-5-1 rated operational current
- 1000000 cycles, AC-15, 2 A at 230 V, 1000000 cycles, AC-15, 3 A at 120 V, 1000000 cycles, AC-15, 4 A at 24 V, 1000000 cycles, DC-13, 0.2 A at 110 V, 1000000 cycles, DC-13, 0.5 A at 24 V, 3600 cyc/h operating rate, 0.5 load factor conforming to EN/IEC 60947-5-1 electrical durability
- -25 to 70 deg C operation temperature
- -40 to 70 deg C storage temperature
Specifications
Brand: Schneider Electric
Contact Configuration: 1NO
Contact Rating: 10, 10 A, 10 A at 600 VAC, 10:00 AM
Enclosure: IP20
Mounting: Rear
Number of Poles: 1
Suitable For Use With: XAL Series Control Stations, XAL Series, XAPS Control Stations, XB5 22 mm Control and Signaling Units
Terminal Type: Screw Clamp, Screw/Clamp
Type: Auxiliary
Contact material: Silver Alloy
UNSPSC: 39121565
UPC: 00785901115076
Schneider Electric ZENL1111 Contact Block
Telemecanique Contact Block, Auxiliary, 1NO Contact Configuration, 10 A Contact, Silver Alloy Contact, 1 Pole, For Use With: XAL Series Control Stations, IP20 Enclosure, Screw Clamp Terminal, Rear Mounting
Additional Description: SQD -ZENL1111 NO CONTROL BOX CONTACT NORMALLY OPEN
Catalog Description: Harmony, 22mm Push Button, contact block, panel mount, 1 NO, screw clamp terminal
Item Features
Resources