Square D LC1D50M7 Tesys D Iec Contactor
Image Disclaimers Message
Square D LC1D50M7 Tesys D Iec Contactor
Square D LC1D50M7 Tesys D Iec Contactor
Part #:LC1D50M7
SKU #: 357005
Key Features
Part #:LC1D50M7
SKU #: 357005
Brand: Square D
Coil Power Rating: 13/15, 40 hp
Coil Voltage: 220, 240 VAC
Contact Configuration: 3NO
Contact Rating: 50 A at 600 VAC
Dimensions: 127 mm H x 75 mm W x 119 mm D, 5 in H x 2.95 in W x 4.69 in D
- 8 kV conforming to IEC 60947 rated impulse withstand voltage
- III overvoltage category
- 80 A at <=140 deg F (60 deg C) power circuit/10 A at <=140 deg F (60 deg C) signaling circuit conventional free air thermal current
- 140 A AC for control circuit conforming to IEC 60947-5-1/ 900 A at 440 V power circuit conforming to IEC 60947 irms rated making capacity
- 900 A at 440 VAC power circuit conforming to IEC 60947 rated breaking capacity
- 10 A gG control circuit conforming to IEC 60947-5-1/100 A gG at <=690 V coordination type 1 power circuit/100 A gG at <=690 V coordination type 2 power circuit associated fuse rating
- 12 to 26 ms closing/4 to 19 ms opening operating time
- 3600 cycles/hr at <=140 deg F (60 deg C) operating rate
- Without built-in bidirectional peak limiting diode suppressor coil technology
- 140 VA at 68 deg F (20 deg C) 60 Hz/160 VA at 68 deg F (20 deg C) 50 Hz inrush power
- 13 VA at 68 deg F (20 deg C) 60 Hz/15 VA at 68 deg F (20 deg C) 50 Hz hold-in power consumption
- 4 to 5 W heat dissipation
- 25 to 400 Hz signaling circuit frequency
- 5 mA signaling circuit minimum switching current
- 17 V signaling circuit minimum switching voltage
- 1.5 ms on energisation between NC and NO contacts/1.5 ms on de-energisation between NC and NO contacts non-overlap time
- >10 MOhm signaling circuit insulation resistance
- TH protective treatment
- 3 pollution deg
- -40 to 158 deg F permissible ambient air temperature around the device, -76 to 176 deg F storage temperature
Square D LC1D50M7 Tesys D Iec Contactor
Square D TeSys D IEC Contactor, Series: LC1D, 240 VAC Coil, 50 A Maximum Load Current, 40 hp Coil, 3 Pole, 50/60 Hz Frequency, 9.6/3.7 W Wattage, 3NO Contact Configuration, 1NO-1NC Auxiliary Contacts, 50 A at 600 VAC Contact, Screw Clamp Terminal, Open Enclosure, 6000000 Cycles Operating Cycles, -23 to 140 deg F Operating, Plate/Rail Mounting, 5 in H x 2.95 in W x 4.69 in D Dimensions
Additional Description: SQD -LC1D50M7 3P OLD CONT 25KW 1NO 1NC 220VAC COIL +OPTIONS
Catalog Description: IEC contactor, TeSys D, nonreversing, 50A, 40HP at 480VAC, up to 100kA SCCR, 3 phase, 3 NO, 220VAC 50/60Hz coil, open