Square D LC1D65AU7 Tesys D Iec Contactor
Image Disclaimers Message
Square D LC1D65AU7 Tesys D Iec Contactor
Square D LC1D65AU7 Tesys D Iec Contactor
Part #:LC1D65AU7
SKU #: 2210322
Key Features
Part #:LC1D65AU7
SKU #: 2210322
Brand: Square D
Coil Power Rating: 50, 50 hp
Coil Voltage: 240, 240 VAC
Contact Configuration: 3NO
Contact Rating: 65 A at 440 VAC
Dimensions: 2.17 in W x 4.72 in D x 4.8 in H, 4.8 in H x 2.17 in W x 4.72 in D
- Conforming to IEC 60947 rated impulse withstand voltage
- III overvoltage category
- 80 A at <=140 deg F (60 deg C) power circuit/10 A at <=140 deg F (60 deg C) signaling circuit conventional free air thermal current
- 1000 A at 440 V power circuit conforming to IEC 60947/140 A AC signaling circuit conforming to IEC 60947-5-1/250 A DC signaling circuit conforming to IEC 60947-5-1 irms rated making capacity
- 1000 A at 440 V power circuit conforming to IEC 60947 rated breaking capacity
- 125 A gG at <=690 V coordination type 1 power circuit/125 A gG at <=690 V coordination type 2 power circuit/10 A gG signaling circuit conforming to IEC 60947-5-1 associated fuse rating
- 1.5 mOhm at 50 Hz - Ith 80 A power circuit average impedance
- 12 to 26 ms closing/4 to 19 ms opening operating time
- 3600 cycles/hr at <=140 deg F (60 deg C) operating rate
- Without built-in suppressor module coil technology
- 140 VA at 68 deg F (20 deg C) 60 Hz/160 VA at 68 deg F (20 deg C) 50 Hz inrush power
- 13 VA at 68 deg F (20 deg C) 60 Hz/15 VA at 68 deg F (20 deg C) 50 Hz hold-in power consumption
- 4 to 5 W heat dissipation
- 25 to 400 Hz signaling circuit frequency
- 5 mA signaling circuit minimum switching current
- 17 V signaling circuit minimum switching voltage
- 1.5 ms on de-energisation (between NC and NO contacts)/1.5 ms on energisation (between NC and NO contacts) non-overlap time
- >10 MOhm signaling circuit insulation resistance
- Direct on-line contactor motor starter
- TH protective treatment
Square D LC1D65AU7 Tesys D Iec Contactor
Square D TeSys D IEC Contactor, Series: LC1D, 240 VAC Coil, 65 A Maximum Load Current, 50 hp Coil, 3 Pole, 50/60 Hz Frequency, 9.6/6.3 W Wattage, 3NO Contact Configuration, 1NO-1NC Auxiliary Contacts, 65 A at 440 VAC Contact, Screw Clamp Terminal, Open Enclosure, 6000000 Cycles Operating Cycles, -23 to 140 deg F Operating, Plate/Rail Mounting, 4.8 in H x 2.17 in W x 4.72 in D Dimensions
Additional Description: SQD -LC1D65AU7 TeSys 3P EVLK CTR 65A 30KW AC3 240VAC 65A IEC AC3 65A IEC
Catalog Description: IEC contactor, TeSys Deca, nonreversing, 65A, 40HP at 480VAC, up to 100kA SCCR, 3 phase, 3 NO, 240VAC 50/60Hz coil, open