Square D LC1K0910M7 Tesys K Iec Contactor
Image Disclaimers Message
Square D LC1K0910M7 Tesys K Iec Contactor
Square D LC1K0910M7 Tesys K Iec Contactor
Part #:LC1K0910M7
SKU #: 2266155
Key Features
Part #:LC1K0910M7
SKU #: 2266155
Brand: Square D
Coil Power Rating: 4, 4 kW, 4.5
Coil Voltage: 220 to 230, 220/230, 220/230 VAC
Contact Configuration: 3NO
Contact Rating: 20/50 A at 600 VAC, 10/50 A at 600 VAC, 9 A at 440 VAC, 9 A at 600 VAC
Enclosure Type: Open
- III overvoltage category
- 20 A at <=122 deg F (50 deg C) power circuit/10 A at <=122 deg F (50 deg C) signaling circuit conventional free air thermal current
- 110 A at 415 V/110 A at 440 V/80 A at 500 V/110 A at 220 to 230 V/110 A at 380 to 400 V/70 A at 660 to 690 V conforming to IEC 60947 rated breaking capacity
- 25 A gG at <=440 V power circuit/25 A aM power circuit associated fuse rating
- 3 mOhm at 50 Hz - Ith 20 A power circuit average impedance
- 600 VAC power circuit conforming to CSA C22.2 No 14/690 VAC power circuit conforming to IEC 60947-4-1/600 VAC power circuit conforming to UL 508 rated insulation voltage
- 1.3 Nm on screw clamp terminals - with screwdriver Philips No 2/1.3 Nm on screw clamp terminals with screwdriver flat 6 mm tightening torque
- 30 VA at 68 deg F (20 deg C) inrush power
- 4.5 VA at 68 deg F (20 deg C) hold-in power consumption
- 1.3 W heat dissipation
- 3600 cycles/hr operating rate
- 10 to 20 ms coil de-energisation and NO opening/10 to 20 ms coil energisation and NO closing operating time
- TC protective treatment
- 6561.68 ft (2000 m) without derating in temperature operating altitude
- <=400 Hz signaling circuit frequency
- 5 mA signaling circuit minimum switching current
- 17 V signaling circuit minimum switching voltage
- 0.02 in non-overlap distance
- 2.2 kW at 400 VAC 50/60 Hz AC-4, 2.2 kW at 220 to 230 VAC 50/60 Hz AC-3, 4 kW at 380 to 415 VAC 50/60 Hz AC-3
- 4 kW at 440 VAC 50/60 Hz AC-3, 4 kW at 480 VAC 50/60 Hz AC-3, 4 kW at 500 to 600 VAC 50/60 Hz AC-3, 4 kW at 660 to 690 VAC 50/60 Hz AC-3
Square D LC1K0910M7 Tesys K Iec Contactor
Square D TeSys K IEC Contactor, Series: LC1K, 220/230 VAC Coil, 9 A Maximum Load Current, 4 kW Coil, 3 Pole, 50/60 Hz Frequency, 3NO Contact Configuration, 1NO Auxiliary Contacts, 9 A at 440 VAC Contact, Screw Clamp Terminal, Open Enclosure, -13 to 122 deg F Operating, Plate/Rail Mounting
Additional Description: SQD -LC1K0910M7 CONTACTOR 9A AC3 4KW 1NO 220VAC COIL
Catalog Description: Contactor, TeSys K, 3P, AC-3, lt or eq to 440V 9A, 1 NO aux., 220 to 230VAC coil