Telemecanique 9007CR67T10 Rotary Actuated Limit Switch

Brand: Telemecanique

Part Number: 9007CR67T10

Square D Rotary Actuated Limit Switch, Fixed Heavy Duty Rotary Head, Series: 9007CR, 600 VAC, 10 A, 2NO-2NC/DPDT-DB Contact Configuration, 1.2 A at 600 VAC, 0.11 A at 250 VDC Contact, 2 Pole, Snap Action, Spring Return Lever Arm Actuator, Screw Clamp Connection, NEMA 2/4/6P/7/9/13 Enclosure, 2.72 in W x 2.79 in D x 6.1 in H Size, 1000000 Cycles Operating Cycles, -20 to 185 deg F Operating, Aluminum, Epoxy Powder Coated

Additional Description: TELE-9007CR67T10 (N) LIMIT SWITCH 600V 10AMP C +OPTIONS NON-CANCELABLE, NON-RETURNABLE

Catalog Description: These industrial heavy duty limit switches are applied in almost any environments. The lever head switches have the largest diameter shaft in the industry. They also have a Viton Quadring shaft seal to ensure positive head and shaft sealing that is dust and watertight. This neutral position lever arm limit switch with standard pretravel has a body and receptacle which is good for hazardous locations. Limit switch has two normally open and two normally closed contact. The snap action contacts will change state when the lever arm in operated in the clockwise or counterclockwise direction. Contacts have an A600 and Q600 inductive ratings and 10A resistive rating. The proper lever arm for the application must be purchased separately. This limit switch is 6.10 inches tall, 2.72 inches wide and 2.79 inches deep. This limit switch is UL Listed for hazardous locations, Division I, Class I, Groups B, C, D and Class II, Groups E, F, G. Switch has a 0.50 inch conduit entry with 14 NPT. Limit swi