Part Number # XUB2AKSWM12T
SKU # 2365196
Image Disclaimers Message
XUB2AKSWM12T
Telemecanique XUB2AKSWM12T Osisense Photoelectric Sensor
Part Number # XUB2AKSWM12T
SKU # 2365196
Telemecanique XUB2AKSWM12T Key Features
| Brand: | Telemecanique |
|---|---|
| Part Number # : | XUB2AKSWM12T |
| SKU #: | 2365196 |
| Amperage Rating: | 100, 100 mA |
| Enclosure Type: | IP65/IP67/IP69K |
| Environmental Conditions: | -40 to 158 deg F Storage Temperature, 30 gn 11 ms Shock Resistance/Watertight/Dust Tight/Corrosion-Resistant (Indoor) |
| Frequency Rating: | 500, 500 Hz, <=500 |
| Light Source: | Audible Alarm/LED, Infrared LED, LED/Audible Alarm |
| Operating Temperature: | -13 to 131, -25 to 55, -25 to 55 deg C |
| Response Time: | 1, 1 ms |
| Sensing Beam: | Infrared LED |
| Sensing Method: | Through Beam, Thru-Beam |
| Sensing Range: | 20, 20 m, 65.62 |
| Series: | XU Series |
| Size: | 0.71 in Dia x 2.99 in L |
| Type: | Singlemode |
| Vibration: | 7, 7 gn |
| Connection type: | 4-Pin M12 Male |
| Country of origin: | ID |
| Output type: | Solid State |
| Manufacturer Name: | YAGEO Corporation |
| UNSPSC: | 39121528 |
| UPC: | 00785901514671 |
Buy Now Pay Later
Get 30 days to pay with Net 30 Terms. Apply Now.
Telemecanique XUB2AKSWM12T Osisense Photoelectric Sensor
Brand: Telemecanique
Part Number: XUB2AKSWM12T
Telemecanique OsiSense Photoelectric Sensor, Singlemode, Cylindrical, Through Beam Sensing Method, 20 m Sensing Range, Infrared LED Sensing Beam, 1 ms Response, Solid State Output, 12 to 24 VDC, 100 mA, 500 Hz, 4-Pin M12 Male, Audible Alarm/LED Light Source, 7 gn, 0.71 in Dia x 2.99 in L, IP65/IP67/IP69K, -25 to 55 deg C Operating, Environmental Conditions: 30 gn 11 ms Shock Resistance/Watertight/Dust Tight/Corrosion-Resistant (Indoor)
Additional Description: TELE-XUB2AKSWM12T (N) Photoelectric Sensor 18mm Emitter XUB NON-CANCELABLE, NON-RETURNABLE
Catalog Description: This photo-electric sensor is part of the XU range, single mode function. It is a design 18, metal transmitter with an M12 connector. Three-wire DC, solid-state output. Thru-beam system with a 15m sensing distance.
XUB2AKSWM12T Specifications
- Cylindrical M18 sensor design
- 10 to 36 VDC supply voltage limits
- <=100 mA with overload and short-circuit protection switching capacity
- 35 mA (no-load) current consumption
- 1.5 V closed state voltage drop
- <15 ms delay first up
- <1 ms delay response
- <1 ms delay recovery
- Without sensitivity adjustment setting-up
- 7 gn, amplitude =+/-1.5 mm (10 to 55 Hz) conforming to IEC 60068-2-6 vibration resistance
- 30 gn (duration =11 ms) conforming to IEC 60068-2-27 shock resistance
- Thru beam detection system
- 49.21 ft (15 m) thru beam need a receiver nominal sensing distance
- Plastic material
- 1 male connector M12, 4 pins electrical connection
- 90 deg lateral line of sight
- Discrete type of output signal
- PBT enclosure material, PMMA lens material
- Test by emission breaking add on input
- 1 LED (green) supply on LED status
XUB2AKSWM12T Application
General Purpose ApplicationsXUB2AKSWM12T Standards
RoHS Compliant|CE Marked|CSA Certified|UL Listed|PROP65: This product can expose you to chemicals including: Diisononyl phthalate (DINP), which is known to the State of California to cause cancer and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.p65Warnings.ca.govSKU #2365196Part Number #XUB2AKSWM12TUNSPSC39121528UPC00785901514671