Telemecanique XUSL4E30H016N Safety Light Curtain

Brand: Telemecanique

Part Number: XUSL4E30H016N

Telemecanique Square D Safety Light Curtain, Type 4, Series: XUSL4E, 29.4 mm W Size, 160 mm Protected Height, 0 to 12/0 to 4 m by Cabling Operating, 8 Beam, 213 mm Overall Height, 4 ms Response, 2.5 deg at 3 m Aperture Angle, LED Light Source, 24 VDC Supply, 2 OSSD Solid-State PNP Arc Suppression Safety Output, 2 A Supply, 0.4 A Output Current, Automatic/Manual Reset, Aluminum Housing Material, IP65/IP67 Enclosure, 5-Pin M12 Male Connector Transmitter/8-Pin M12 Male Connector Receiver Connection

Additional Description: TELE-XUSL4E30H016N (N) TYPE 4 30 mm resolution 160 mm prot ht Telemecanique Safety light curtains XUSL, XUSL For hand protection, Std sensing range, Hp = 160 mm, R=30 mm NON-CANCELABLE, NON-RETURNABLE

Catalog Description: This XUSL4E Type 4 Safety Light Curtain is designed for hand detection of operator in the vicinity of hazardous machinery. Its transmitter-receiver system creates 8 light beams with a protected height of 160mm. Its PFHD reliability data is 7.8 x 10â»â¹. It has an aluminum case and its integral LEDs offer a local Signaling for clearly display of device's status. It can be used as standalone sensor (i.e without safety control unit) or in association with an appropriate safety control unit. It has 2 NO Solid State PNP safety outputs (OSSDs) and meets the requirements of category 4, performance level PL e, SIL 3 as described in EN/ISO 13849-1, EN/IEC 61508 and Type 4 in compliance with EN/IEC 61496-1, EN/IEC 61496-2. Its operating temperature range is -30°C to +55°C and the sensing distance is 0m to 4m or 0m to 12m selectable by wiring.