Thomas & Betts DS3404MP00K Russellstoll Max-Gard Male Pin Plug
Part Number # DS3404MP00K
SKU # 2359950
DS3404MP00K
Thomas & Betts DS3404MP00K Russellstoll Max-Gard Male Pin Plug
Part Number # DS3404MP00K
SKU # 2359950
Thomas & Betts DS3404MP00K Key Features
| Brand: | Thomas & Betts |
|---|---|
| Part Number # : | DS3404MP00K |
| SKU #: | 2359950 |
| Dimensions: | 7-7/8 in H |
| UNSPSC: | 39121404 |
| UPC: | 00708917174950 |
Buy Now Pay Later
Get 30 days to pay with Net 30 Terms. Apply Now.
Thomas & Betts DS3404MP00K Russellstoll Max-Gard Male Pin Plug
Brand: Thomas & Betts
Part Number: DS3404MP00K
Russellstoll Max-Gard Male Pin Plug, 3-Phase Waterproof, 480 VAC, 30 A, 60 Hz Frequency, 3 Pole, 4 Wires, NEMA 4X/6, Industrial Grade, -40 to 130 deg C, Pressure-Type Solderless Screw Terminal, Cast Aluminum, 7-7/8 in H Dimensions
Additional Description: TB -DS3404MP00K (N) 30A,PLG,3P4W,MG,404,00K,3P480V NON-CANCELABLE, NON-RETURNABLE
Catalog Description: MaxGard Male Plug with Control Contacts, 30 Amp, 3 Pole 4 Wire, 30 480V, 60Hz
DS3404MP00K Application
For use in "People Movers" which require air conditioning and heater unit power when docked at end of line locations for maintenance, overhaul and hazardous locationsDS3404MP00K Item Features
- With 1-11/16 in bushing, 2-control contacts
- Waterproof construction provides environmental separation at the front of each device (they dont have to be connected together just to be called "watertight")
- Center ground contact
- 24-single rated factory polarizations
- Gated deadfront construction
- Two optional control contacts
- O-rings/environmental separation, full line
- Complete line epoxy powder coated - standard
- All devices upon disconnect under load shall have provision so the arc is contained and extinguished within the insulation cavity, making it impossible to withdraw a live plug
- All devices shall be factory polarized for amperage, voltage, frequency and phase, thus providing a single voltage rating, single interface system
- The grounding of the device shall be accomplished through a separate center ground (earth) make first and break last pole on all devices for complete system grounding
- All devices shall accommodate up to four power pins plus a separate center ground pin and they shall be integral with the connector bodies (five pins total)
- Watertight capability shall be obtained by using a gasketed screw cap
- All devices must have an option for two control contacts, which shall be make last and break first for use in electrical interlocks and/or control circuits
DS3404MP00K Standards
UL File No. E68085|CSA C22.2-182.1 File No. LR14096|OSHA Compliant|MIL-STD-105/1344|ASTM D570/D2565|NEMA PR4-1983|NEC Certified|IEC 309-1SKU #2359950Part Number #DS3404MP00KUNSPSC39121404UPC00708917174950
Image provided may only be a representation of final product and may include optional equipment