LL18
Thomas & Betts LL18 BlueKote Conduit Body
Part Number # LL18
SKU # 2135556
Thomas & Betts LL18 Key Features
| Brand: | Thomas & Betts |
|---|---|
| Part Number # : | LL18 |
| SKU #: | 2135556 |
| UNSPSC: | 39131708 |
| UPC: | 00786210165776 |
Buy Now Pay Later
Get 30 days to pay with Net 30 Terms. Apply Now.
Thomas & Betts LL18 BlueKote Conduit Body
Brand: Thomas & Betts
Part Number: LL18
T&B BlueKote Conduit Body, Type LL, 1/2 in Hub, 2 Hubs, 4.9 cu-in Capacity, Form 8, NEMA 4X Enclosure, Tapered NPT, Iron, Epoxy Powder Coated/Zinc Plated, Gray, 4.94 in L x 1.44 in W x 2.13 in H
Additional Description: TB -LL18 (N) 1/2 INCH CONDUIT BODY,IRON, LL, F-8 F-8 NON-CANCELABLE, NON-RETURNABLE
Catalog Description: 1/2 Inch Form 8, LL Conduit Body, Body Material Gray Iron with Zinc Plating and Baked On Epoxy Powder Coat with BlueKote Internal Coating for Use with Rigid/IMC Conduit
LL18 Application
For rigid/IMC conduit, connect sections, act as pull outlets when conductors are being installed and provide easy access for splices in branch conductorsLL18 Item Features
- Bluekote Teflon based internal finish provides a slick, easy glide internal surface which significantly lowers the amount of force necessary to pull wires
- Eliminates rough internal surfaces that can cut into cable jacket, insulation and conductors during pulling and also reduces installation time and risk of installer strain
- Triple layer protection including two layers of epoxy coating which stops corrosion in its tracks
- Bodies are designed with a flat back, allowing more cubic inch capacity
- T and b form 7 bodies and covers are interchangeable with Crouse-Hinds and Appleton form 7 bodies and covers
- Conduit bodies make 90 deg bends in conduit runs, act as mounting outlets for wiring devices and lighting fixtures and to provide access to conductors for maintenance and future system changes
- Left side access opening
LL18 Standards
CSA Certified|UL File No. E2969SKU #2135556Part Number #LL18UNSPSC39131708UPC00786210165776
Image provided may only be a representation of final product and may include optional equipment