Part Number # B7CA
SKU # 2235904
B7CA
Hubbell B7CA Circuit Breaker Enclosure
Part Number # B7CA
SKU # 2235904
$3811.85 / Each
Hubbell B7CA Key Features
| Brand: | Hubbell |
|---|---|
| Part Number # : | B7CA |
| SKU #: | 2235904 |
| Electrical Ratings: | 100 A, 60 Hz |
| Finish: | Lacquer |
| Frame: | E/F/ED/H/T1 |
| NEMA Rating: | NEMA 3/4/4X/7/9 |
| Series: | B7C |
| Depth: | 9-1/8 in |
| UNSPSC: | 39121601 |
| UPC: | 00783936015040 |
Buy Now Pay Later
Get 30 days to pay with Net 30 Terms. Apply Now.
$3811.85 / Each
Quantity:
- Killark, B7CA, Circuit Breaker Enclosure, Series: B7C, 11 in Width, 9-1/8 in Depth, 18 in Height, NEMA 3/4/4X/7/9 NEMA Rating, Hinged Cover, E/F/ED/H/T1 Frame, 100 A, 60 Hz Electrical Rating, Wall Mounting, 40 deg C, Cast Copper-Free Aluminum, Lacquer
B7CA Application
For locations such as petroleum refineries, chemical and petroleum plants with indoor and outdoor processes, motor control and circuit protection in locations made hazardous due to the presence of flammable gases or vapors, combustible dust or easily ignitable fiber and flyings and areas which are subject to corrosion, weather and dampnessB7CA Item Features
- Breaker handle - provisions for lock "ON"/"OFF" positions with up to 3 padlocks
- Spring loaded to prevent damage of breaker toggle and provides positive handle alignment
- Ductile Mounting Lugs - Lugs are made of ductile aluminum alloy to adjust to irregular mounting surfaces without damage to enclosure
- Provision for grounding supplied as standard
- Special conduit openings can be supplied at factory or can be field installed
- Gasketed flange - nitrile (buna-N) O-ring gasket is located inside cover bolt circle to prevent water seeping into enclosure
- Universial Mounting Pan - Sheet aluminum pan is pre-drilled to facilitate easy field installation of major circuit breaker brands
- Conduit openings supplied - standard conduit openings include power conduit top and bottom and a plugged opening suitable for field installation of drain and breather
- More wiring room, meets the latest NEC/CEC wire bending requirements for circuit breaker enclosures
- Recessed flange notches - flanges are notched to allow for easier cover opening with prying instrument without flange damage
- Hinged cover is standard (left side hinge)
- High strength, lighter in weight, corrosion resistant
- Quick release, captivated cover bolts of 316 grade stainless steel triple lead bolts require only 3-1/2 turns to disengage
B7CA Standards
CSA File No. LR11714|Class I Zones 1 and 2 Groups IIB+H2, IIA|Class II Divisions 1 and 2 Groups E, F, G|PROP65: This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov|UL File No. E83969SKU #2235904Part Number #B7CAUNSPSC39121601UPC00783936015040
Image provided may only be a representation of final product and may include optional equipment