Markel P3P5107CA1N Unit Heater
Image Disclaimers Message
Markel P3P5107CA1N Unit Heater
Markel P3P5107CA1N Unit Heater
Part #:P3P5107CA1N
SKU #: 2285826
Key Features
Part #:P3P5107CA1N
SKU #: 2285826
Brand: Markel
Amperage Rating: 9.1, 9.1 A
Capacity: 25.6, 25.6 Btu/hr
Dimensions: 21-1/2 in W x 6-1/2 in D x 24-5/16 in H
Finish: Powder Coated
Flow Rate: 700, 700 cfm
- Heavy 18 ga welded steel cabinet with powder coated finish and control compartment housing a master terminal board with a hinged and latched access door, simplifying wiring, installation maintenance
- Copper clad steel sheath element with continuously brazed steel fins formed to allow side draw through air flow
- All units come equipped with automatic reset type limit controls to de-energize the heater should an over temperature situation occur
- Totally enclosed, 1-speed, 1-phase, permanently lubricated, thermally protected motors with unit bearings on 3 to 20 kW models
- All motors mounted with rubber insulators to minimize vibration and noise
- Fan over-ride purges unit of residual heat at shutdown
- Louvers are individually adjustable for directional control of air flow up to 15 deg from straight horizontal
- Unit heaters can be mounted for horizontal or vertical discharge
Markel P3P5107CA1N Unit Heater
TPI Unit Heater, 3-Phase Fan Forced Standard, Series: 5100, 25.6 Btu/hr, 480 VAC, 9.1 A, 7.5 kW, 700 cfm, 34 deg F, Wall Mount, 10 ft Horizontal/12 ft Vertical Mounting Height, Steel, Powder Coated, 21-1/2 in W x 6-1/2 in D x 24-5/16 in H
Additional Description: MRKL-P3P5107CA1N 7.5KW 480V 3P 5100 SERIES UNIT HTR.
Catalog Description: Fan Forced Unit Heater, 3 PH, 7.5 KW, 480 V, Wall Mounting, Steel Housing Material, Dimensions- 21-1/2 Width X 24-5/16 Height X 6-1/2 Depth IN, BTU Rating- 25.6 (Per Hour), 9.1 AMP, Powder Coated Finish