Brand: Siemens
Siemens 3RX9501-2BA00 AS-I Power Supply Unit
Image Disclaimers Message
Brand: Siemens
Siemens 3RX9501-2BA00 AS-I Power Supply Unit
Brand: Siemens
Siemens 3RX9501-2BA00 AS-I Power Supply Unit
Part #:3RX9501-2BA00
SKU #: 2222257
$588.21/EA
Key Features
Part #:3RX9501-2BA00
SKU #: 2222257
Brand: Siemens
Dimensions: 125 mm H x 50 mm W, 125 mm H x 50 mm W x 125 mm D
Input Voltage: 120/230, 120/230 VAC
Powering Capacity: 100
Specifications: 84% Efficiency, Snap-On/DIN Rail Mount, IP20, Spring-Loaded Terminal, DIN Rail Mount
Temperature Rating (Degrees F): -10 to 70, -10 to 70 deg C
$588.21/EA
- Higher rating the power supply units deliver currents of 2.6 to 8 A
- Integrated data decoupling as the result, AS-interface is able to convey both data and power along a single line
- Integrated ground fault detection the power supply units perform the reliable detection and signaling of ground faults according to IEC 60204-1
- The AS-interface voltage can be disconnected automatically in the event of a ground fault
- Integrated overload detection an output overload is detected and reported over a diagnostics LED
- Diagnostics memory any ground faults or overloads on the output side are stored in a diagnostics memory until the device is reset
- Remote reset and remote signaling using relay contacts, a ground fault can be signaled and evaluated by a central controller and/or indicator light
- Diagnostics LED 3 different LED indicate the status of the AS-interface power supply locally at the power supply unit
- Ultra wide input range/2-phase connection the ultra wide input range of 120 to 500 V of the 8 A version means that the supply units can be used in virtually any network worldwide
- In addition, this version dispenses with the need for an N conductor as the device can be connected directly between 2 phases of a network
- Removable terminal blocks with spring-type connections for easy exchanging of devices, each power supply unit has three removable terminal blocks: for the input side, for the output side and for Signal/RESET connections
- With integrated overload detection with AS-interface data decoupling
Specifications
Brand: Siemens
Dimensions: 125 mm H x 50 mm W, 125 mm H x 50 mm W x 125 mm D
Input Voltage: 120/230, 120/230 VAC
Powering Capacity: 100
Specifications: 84% Efficiency, Snap-On/DIN Rail Mount, IP20, Spring-Loaded Terminal, DIN Rail Mount
Temperature Rating (Degrees F): -10 to 70, -10 to 70 deg C
Type: AS-Interface
Country of origin: RO
Input current: 6
Output current: 2.6, 2.6 A
Output voltage: 30, 30 VDC
Manufacturer Name: Siemens
UNSPSC: 39122221
UPC: 00754554945057
Item Features
Item FeaturesCSA Certified|UL Listed|EAC Approved|C-Tick|CE Certified|ABS Approved|Bureau Veritas Certified|Lloyds Registered|PRS Certified|RINA Certified|ASi Approved
Resources