Markel F1F5105N Unit Heater
Image Disclaimers Message
Markel F1F5105N Unit Heater
Markel F1F5105N Unit Heater
Part #:F1F5105N
SKU #: 2200664
Key Features
Part #:F1F5105N
SKU #: 2200664
Brand: Markel
Amperage Rating: 24.1, 24.1 A
Capacity: 17.1, 17.1 Btu/hr
Dimensions: 14-15/32 in W x 6-1/2 in D x 17-3/4 in H
Finish: Powder Coated
Flow Rate: 400, 400 cfm
- Heavy 18 ga welded steel cabinet with powder coated finish and control compartment housing a master terminal board with a hinged and latched access door, simplifying wiring, installation maintenance
- Copper clad steel sheath element with continuously brazed steel fins formed to allow side draw through air flow
- All units come equipped with automatic reset type limit controls to de-energize the heater should an over temperature situation occur
- Totally enclosed, 1-speed, 1-phase, permanently lubricated, thermally protected motors with unit bearings on 3 to 20 kW models
- All motors mounted with rubber insulators to minimize vibration and noise
- Fan over-ride purges unit of residual heat at shutdown
- Louvers are individually adjustable for directional control of air flow up to 15 deg from straight horizontal
- Unit heaters can be mounted for horizontal or vertical discharge
Markel F1F5105N Unit Heater
TPI Unit Heater, 1-Phase Fan Forced Standard, Series: 5100, 17.1 Btu/hr, 208 VAC, 24.1 A, 5 kW, 400 cfm, 40 deg F, Wall Mount, 9 ft Horizontal/Vertical Mounting Height, Steel, Powder Coated, 14-15/32 in W x 6-1/2 in D x 17-3/4 in H
Additional Description: MRKL-F1F5105N 5KW 208V 1 P 5100 SERIES UNIT HTR.
Catalog Description: Fan Forced Unit Heater, 1 PH, 5 KW, 208 V, Wall Mounting, Dimensions- 14-15/32 Width X 17-3/4Height X 6-1/2 Depth IN, Steel Housing Material, BTU Rating- 17.1 (Per Hour), 24.1 AMP, Air Flow- 400 CFM