Part #:F3F5125CA1L
SKU #: 2356277
Key Features
Part #:F3F5125CA1L
SKU #: 2356277
Brand: Markel
Amperage Rating: 69.5, 69.5 A
Capacity: 85.3, 85.3 Btu/hr
Dimensions: 29-1/4 in W x 10-1/16 in D x 34 in H
Finish: Powder Coated
Flow Rate: 2000/1800, 2000/1800 cfm
- Heavy 18 ga welded steel cabinet with powder coated finish and control compartment housing a master terminal board with a hinged and latched access door, simplifying wiring, installation maintenance
- Copper clad steel sheath element with continuously brazed steel fins formed to allow side draw through air flow
- All units come equipped with automatic reset type limit controls to de-energize the heater should an over temperature situation occur
- Totally enclosed, 1-speed, 1-phase, permanently lubricated, thermally protected motors with unit bearings on 3 to 20 kW models
- All motors mounted with rubber insulators to minimize vibration and noise
- Fan over-ride purges unit of residual heat at shutdown
- Louvers are individually adjustable for directional control of air flow up to 15 deg from straight horizontal
- Unit heaters can be mounted for horizontal or vertical discharge
Markel F3F5125CA1L Unit Heater
TPI Unit Heater, 3-Phase Fan Forced Standard, Series: 5100, 85.3 Btu/hr, 208 VAC, 69.5 A, 25 kW, 2000/1800 cfm, 40/44 deg F, Wall Mount, 12 ft Horizontal/22 ft Vertical Mounting Height, Steel, Gray, Powder Coated, 29-1/4 in W x 10-1/16 in D x 34 in H
Additional Description: MRKL-F3F5125CA1L 25KW 208V 3P 5100 SERIES UNIT HTR.
Catalog Description: Fan Forced Unit Heater, 3 PH, 25 KW, 208 V, Wall Mounting, Dimensions- 29-1/4 Width X 34 Height X 10-1/16 Depth IN, Steel Housing Material, BTU Rating- 85.3 (Per Hour), 69.5 AMP, Air Flow- 2000/1800 CFM