- Heavy 18 ga welded steel cabinet with powder coated finish and control compartment housing a master terminal board with a hinged and latched access door, simplifying wiring, installation maintenance
- Copper clad steel sheath element with continuously brazed steel fins formed to allow side draw through air flow
- All units come equipped with automatic reset type limit controls to de-energize the heater should an over temperature situation occur
- Totally enclosed, 1-speed, 1-phase, permanently lubricated, thermally protected motors with unit bearings on 3 to 20 kW models
- All motors mounted with rubber insulators to minimize vibration and noise
- Fan over-ride purges unit of residual heat at shutdown
- Louvers are individually adjustable for directional control of air flow up to 15 deg from straight horizontal
- Unit heaters can be mounted for horizontal or vertical discharge
Specifications
Brand: Markel
Amperage Rating: 18.1, 18.1 A
Capacity: 17.1, 17.1 Btu/hr
Dimensions: 14-15/32 in W x 6-1/2 in D x 17-3/4 in H
Finish: Powder Coated
Flow Rate: 400, 400 cfm
Frequency Rating: 50/60, 50/60 Hz
Mounting Height: 9 ft Horizontal/Vertical
Power Rating: 5, 5 kW
Series: 5100
Temperature Rating (Degrees F): 40, 40 deg F
Type: 1-Phase Fan Forced Standard
Voltage Rating: 277, 277 VAC
Material: Steel
Mounting type: Wall
UNSPSC: 40101809
UPC: 00686334645843
Markel G1G5105N Unit Heater
TPI Unit Heater, 1-Phase Fan Forced Standard, Series: 5100, 17.1 Btu/hr, 277 VAC, 18.1 A, 50/60 Hz, 5 kW, 400 cfm, 40 deg F, Wall Mount, 9 ft Horizontal/Vertical Mounting Height, Steel, Powder Coated, 14-15/32 in W x 6-1/2 in D x 17-3/4 in H
Additional Description: MRKL-G1G5105N 5KW 277V 1P 5100 SERIES UNIT HTR.
Catalog Description: Fan Forced Unit Heater, 1 PH, 5 KW, 277 V, Wall Mounting, Steel Housing Material, Dimensions- 14-15/32 Width X 17-3/4 Height X 6-1/2 Depth IN, BTU Rating- 17.1 (Per Hour), 18.1 AMP, Air Flow- 400 CFM
Item Features