Part Number # MT0075C
SKU # 2244818
Image Disclaimers Message
MT0075C
Siemens MT0075C Control Power Transformer
Part Number # MT0075C
SKU # 2244818
$109.94 / Each
Typical price:$208.00 / Each
Siemens MT0075C Key Features
| Brand: | Siemens |
|---|---|
| Part Number # : | MT0075C |
| SKU #: | 2244818 |
| Dimensions: | 3.46 in H x 3 in W x 4.1 in D |
| Enclosure Type: | IP20 |
| Frequency Rating: | 50/60, 50/60 Hz |
| Insulation: | Epoxy |
| Maximum Amperage Rating: | 0.29, 0.29 A |
| Phase: | 1 |
| Primary Voltage: | 120/240, 120/240 V AC, 120/240 VAC |
| Secondary Voltage: | 24, 24 V AC, 24 VAC |
| Temperature Rating (Degrees F): | 55, 55 deg C |
| Type: | Class MT |
| Connection type: | Screw |
| Country of origin: | MX |
| Mounting type: | Slotted |
| Manufacturer Name: | Siemens |
| UNSPSC: | 39121026 |
| UPC: | 00754554026725 |
Buy Now Pay Later
Get 30 days to pay with Net 30 Terms. Apply Now.
$109.94 / Each
Typical price:$208.00 / Each
Quantity:
- Siemens Control Power Transformer, Class MT, 120/240 V AC Primary, 24 VAC Secondary, 75 VA Power, 50/60 Hz Frequency, 1 ph, 0.29 A Maximum, Screw Connection, Slotted Mounting, Epoxy Insulation, IP20 Enclosure, 55 deg C, 3.46 in H x 3 in W x 4.1 in D Dimensions
MT0075C Application
For domestic usageMT0075C Item Features
- Epoxy encapsulated (50 to 750 VA), epoxy resin impregnated (1 to 5 kVA)
- Completely seals the transformer coils against moisture, dust, dirt and industrial contaminants for maximum protection in hostile and industrial environments
- Fuse clips (most models), factory mounted for integral fusing on the secondary side to save panel space, save wiring time and save the cost of buying an add-on fuse block or kit
- Integrally molded barriers, between terminals and transformer, protect against electrical creepage, up to 30% greater terminal contact area permits low loss connections, extra deep barriers reduce the chance of shorts from frayed leads or careless wiring
- Terminals, molded into the transformer, are difficult to break during wiring, a full quarter-inch of thread on the #10-32 terminal screws prevents stripping and pullout
- Jumpers supplied, two jumper links are standard with all transformers which can be wired for dual primary voltages
- Laminations are built with silicon steel to minimize core losses and to increase optimum performance and efficiency
- Insulation materials are of the highest rating available for the temperature class
- Robust design
- 0.29 A max at 240 VAC
MT0075C Standards
cUL Listed|UL Listed|CSA Certified|ANSI SpecifiedSKU #2244818Part Number #MT0075CUNSPSC39121026UPC00754554026725