Part Number # MT2000I
SKU # 2171587
Image Disclaimers Message
MT2000I
Siemens MT2000I Control Power Transformer
Part Number # MT2000I
SKU # 2171587
$950.37 / Each
Typical price:$1798.00 / Each
Siemens MT2000I Key Features
| Brand: | Siemens |
|---|---|
| Part Number # : | MT2000I |
| SKU #: | 2171587 |
| Dimensions: | 6.33 in H x 7 in W x 8.16 in D |
| Enclosure Type: | Open |
| Frequency Rating: | 50/60, 50/60 Hz |
| Insulation: | Class 180 deg C |
| Phase: | 1 |
| Primary Voltage: | 380/400/415, 380/400/415 V AC, 380/400/415 VAC |
| Secondary Voltage: | 110 x 220, 110 x 220 V AC, 110 x 220 VAC |
| Temperature Rating (Degrees F): | -4 to 104, -4 to 104 deg F |
| Type: | Class MT |
| Connection type: | Screw Terminal, Terminal Screw |
| Country of origin: | MX |
| Mounting type: | Surface |
| Power factor: | 20, 20 %, 20% |
| Manufacturer Name: | Siemens |
| UNSPSC: | 39121026 |
| UPC: | 00754554357645 |
Buy Now Pay Later
Get 30 days to pay with Net 30 Terms. Apply Now.
$950.37 / Each
Typical price:$1798.00 / Each
Quantity:
- Siemens Control Power Transformer, Class MT, 380/400/415 V AC Primary, 110 x 220 VAC Secondary, 2000 VA Power, 50/60 Hz Frequency, 1 ph, Power Factor: 20 %, Screw Terminal Connection, Surface Mounting, Class 180 deg C Insulation, Open Enclosure, -4 to 104 deg F, 6.33 in H x 7 in W x 8.16 in D Dimensions
MT2000I Application
Domestic ApplicationsMT2000I Item Features
- Enclosed coils, completely encloses the transformer coils against moisture, dust, dirt and industrial contaminants for maximum protection in hostile and industrial environments
- Fuse clips, factory mounted for integral fusing on the secondary side to save panel space, save wiring time and save the cost of buying an add on fuse block or kit
- Integrally finger-safe terminals, between terminals and transformer, protect against electrical creepage
- Up to 30% greater terminal contact area permits low loss connections
- Extra deep barriers reduce the chance of shorts from frayed leads or careless wiring
- Terminals molded into the transformer are difficult to break during wiring
- A full quarter-inch of thread on the 8-32 terminal screws prevents stripping and pullout
- Jumpers supplied, two jumper links are standard with all transformers which can be wired for dual primary voltages
MT2000I Standards
UL Listed|cUL Listed|ANSI Specified|CSA CertifiedSKU #2171587Part Number #MT2000IUNSPSC39121026UPC00754554357645